PCR 650

The PCR 650 hydraulic pile breaker is a unique machine capable off controlling the pile cropping process. Manufactured in the UK this pile breaker provides civil engineering contractors with a new attachment for removing excess precast piles and allow the operator to trim the pile down to the correct level.

PCR-650 Pile Breaker is used for breaking down the piles leaving the rebar exposed on both diameter piles and square precast piles. Easy to use and set up on site the PCR-650 Pile Breaker runs from the excavator’s hydraulics and has been designed to handle the pressures generated by the excavator’s hydraulic system (650 bar) and use it to its full extent.

The new design of the PCR-650 Pile Breaker delivers the power at the cutting points evenly with advanced flow control delivering power and cutting accuracy when and where it’s needed most.

The PCR-650 Pile Breaker rugged construction is suited to the harsh environment it will be used in and will provide many years of service.

• Maximum Diameter Round Pile: 650 mm
• Maximum Size Square Pile: 500 mm
• Maximum Pressure: 350 bar
• Weight: 1750 kg
• Excavator Weight: 13 tons +

• Handles Square and Round Piles
• Interchangeable Cutting Teeth made to your specification
• Cutting power and accuracy with all 4 blades pressing the same force on each cutting point
• Light weight design using high strength materials reducing weight
• Can work in confined spaces and where piles are closely grouped

• Piles can be reduced faster due to the new design that uses a new profile of cutting tooth that removes the concrete from the rebar.
• The machine can process the pile, not just cut it, by crushing the wasted concrete, turning it into a material that is reusable on site. This removes the need to send the pile concrete to be crushed or sent to land fill.
• The machine uses a special hydraulic control system that increases the power of the machine and controls the cutting heads so they are all fully synchronised, enabling  the machine to crush the pile accurately.
• All wear parts are made from special alloys that increase the life span of the cutting teeth.

*All plant and equipment is a minimum of 1 week hire